滑片式压缩机采用传统的、已经得到验证的技术， 以非常低的速度（1450rpm）直接进行驱动，具有wuyu伦比的的可靠性。 转子是惟一连续运行的部件， 上面有若干个沿长度方向切割的槽， 其中插有可在油膜上滑动的滑片。 转子在气缸的定子中旋转。在旋转期间， 离心力将滑片从槽中甩出，形成一个个单独的 压缩室。旋转使压缩室的体积不断减小，空气压力不断增大。 通过注入加压油来控制压缩产生的热量。 高压空气从排气口排出，其中残留的油通过zui终的油分离器予以清除。 压缩能力： 康普艾滑片式 空气压缩机的功率范围为 1.1 kW 至 75 kW （1.5 至 100hp），所产生的工作压力为 7 至 8 和 10 bar （101 至 145psi）。 其典型用途是： OEM、印刷、气动 实验室、牙科、 仪表 机床、包装、机器人。

Sliding vane compressor is driven directly at very low speed (1450 rpm) using traditional and proven technology, and has comparable reliability with Wuyu. The rotor is the only continuous running component with several slots cut along the length direction, and sliders that can slide on the oil film are inserted. The rotor rotates in the stator of the cylinder. During the rotation, the centrifugal force throws the slider out of the groove to form a separate compression chamber. Rotation reduces the volume of the compressor and increases the air pressure. The heat generated by compression is controlled by injecting pressurized oil. The high pressure air is discharged from the exhaust port, and the remaining oil is removed through the Zui final oil separator. Compression capacity: Compaq slider air compressor power range from 1.1 kW to 75 kW (1.5 to 100 hp), resulting in working pressure of 7 to 8 and 10 bars (101 to 145 psi). Its typical uses are: OEM, printing, pneumatic laboratory, dentistry, instrument machine tools, packaging, robots.



空压机高温是空压机使用过程中较常见的故障之一，尤其是对于在室外施工工作的移动式空压机，在炎热的夏季更加重了这一问题发生的概率。

High temperature of air compressor is one of the common faults in the use of air compressor. Especially for mobile air compressor working outdoors, the probability of this problem is more serious in hot summer.